As the most efficient anchor for preset mooring systems available today, the OMNI-Max Anchor offers a variety of performance characteristics and cost-saving efficiencies.

Anchor Handling Tools

Rent the equipment you need for your next offshore mooring operation.

Delmar Systems owns a large inventory of certified mooring hardware, anchor handling tools, and related equipment.

We also provide purpose-designed tools and equipment, specific to Delmar, to address specialized tasks in mooring operations. All of our mooring gear, tools, and equipment are available for rent, and everything is extensively approved, prepared, inspected, and tracked from date of purchase and throughout its service life to assure safety and reliability.

Some of our anchor handling tool categories include:

  • Chain
  • Chase/tow wire
  • Chasers and hooks of various designs
  • Wire spooling units/turntables
  • Buoys
  • Connection hardware
  • Deepwater air winches and compressors

Chain

Delmar inventories a large supply of mooring chain. Whether you need a standby/backdown system or 3 1/4″ certified mooring chain for a preset mooring system or chain replacement, our equipment can satisfy any mooring requirement.

Chase/Tow Wire

Delmar inventories a large supply of certified wire for any possible mooring-related job, including long-length certified chase wire to reduce connection points and possible failures. In addition, we maintain comprehensive tracking of the wire from date of purchase through wire life, ensuring the highest quality wire is used. Whether your project requires 1 1/2″ tow wire or 3 3/4″ certified mooring wire, Delmar can meet the challenge of mooring in all water depths.

J-Chaser

The Delmar Deepwater J-chaser will retrieve anchors when a wire has parted during the deployment or retrieval process or when a specialized anchor deployment process does not employ the rig permanent chaser system.

Specifically, this chaser is non-commercial designed, as it’s produced exclusively for our use with our customers. Our Deepwater chasers offer less damage to mooring gear, increased breaking capacity, and superior material composition compared to any standard commodity anchor handling tools you might find on the general market.

Wire Spooling Units/Turntables

Delmar has designed and built several wire handling units available to facilitate wire change-outs, both dockside and in the field, on vessels and MODUs. We have spooling capacity available in the Gulf of Mexico and Australia, as well as the ability to ship these units worldwide.

Buoys

Delmar provides a large inventory of steel and submersible syntactic buoys for use with mooring systems. These buoys are multi-purpose and can range from 1.7 kips to 35 tons and up to 10,000 FSW submersion.

  • Surface cylindrical buoys range from 5′ x 7′ to 12′ x 16′ and are available for rent or on an as-needed basis.
  • Sub-surface buoyancy can be provided in either steel construction or syntactic materials.

Air Winches/Compressors

Delmar owns an inventory of deep-reach air winches, complete with the required supporting compressors for specialty, subsea installation, and mooring projects.

Connection Hardware

Delmar has a complete inventory of connection hardware available for rent including swivels, connector links, pear links, tri-plates, grapnels, and sockets. These serialized components are tracked and inspected prior to each job use. Each component is class-certified, material-specified, and tracked from its original delivery to Delmar until its service retirement.

With any piece of hardware, you– will know exactly when and by whom it was produced, when it was purchased, and each time it has been used – including how many days it was used. Additionally, between each use, these components are NDT and visually inspected prior to being returned into re-useable stock in our inventory management system.

On every Delmar job, we provide a comprehensive documentation package for this equipment containing the pertinent certification records along with the inspection history.